How To Install Mini Blind Brackets

Download Article

Download Article

Rather than spending big bucks to get someone to install your blinds for you, why not do information technology yourself? The procedure isn't as hard equally information technology might sound. To install blinds, mensurate the dimensions for an within or outside mount and purchase blinds specific to those measurements; attach the brackets using a drill, place the caput rail into the brackets, attach the valence to the head rail, and secure the blind wand to consummate the process.

1. 

   1

   Measure your windows. You need to do this to make certain that you buy the correct size of blind.^[1] Use a measuring tape to make up one's mind the size of the window. You tin can either mount your blinds on the inside or on the outside of the casing. If yous hang your blinds on the exterior, your window (and the blinds) will look larger. Hanging the blinds on the within gives your window a slimmer look. Inside mounts likewise allow more light to shine around the edges of the blinds.^[ii]

   • Measuring for an outside mount: Measure along the outside edges of the casing that surrounds the window. Measure out the verbal length from the height of the casing to the bottom of the casing (or to the sill if your window has i).

     

   • Measuring for an inside mount: Put your measuring record within the casing where the glass of the window meets the casing. Measure the width of the window at the pinnacle, heart and bottom. If there is whatsoever departure in the numbers, use the smallest figure to base your measurements off of.

     

2. 

   2

   Purchase your blinds co-ordinate the measurements you fabricated. There are many different kinds of blinds to cull from--vinyl, PV, aluminum, wood--and the selection you make volition have to be based on personal preference.^[3]

   • If you plan on putting aluminum blinds in a nursery or your kid's room, brand certain that the blinds you cull are painted with certified lead-complimentary paint.
   • White blinds can give your infinite a nice, clean look.^[4]

   Advertisement

3. 3

   Make your mounting marks. Unpack your blinds and make sure all of the parts are in that location. If at that place are instructions that come up with your blinds, follow them along with the steps listed hither. Yous will demand to make some pencil marks so that you know where to identify your brackets.^[v]

   • For an outside mountain: Hold the bullheaded up so that the head rails (the top part of the blind) is centered and leveled with your window's casing (the two vertical slats that class the 'frame' of the window). Brand a pencil mark correct below the head rail on each side of the casing. You should also brand a mark ¼ of an inch past the end of each caput track.

     

   • For an within mount: Place the head rail inside the casing. Information technology should be level--proceed your handrail level, even if your window is not. Make pencil marks below the head rail on each end.

     

   Advertizing

1. 

   ane

   Open the bracket door and hold the terminate brackets in place. Place them inside the pencil marks you have fabricated. There are two open sides to the bracket--one of them should confront out towards y'all, while the other should face in towards the centre of the window. The bracket door must face towards the inside of the room.

   • If your subclass door is tricky to use, consider trying to open it with one of your fingers and a screwdriver.

2. 2

   Mark where you will exist drilling. Using your pencil, mark the spots where you lot volition need to drill your pilot holes (there should exist two of them). You should choose two diagonal holes to drill into so that your brackets are sturdier. Have the brackets away and hold up a level to the two holes are even.^{[half dozen]}

   • For an exterior mount: The brackets should be placed on the outside face of the window casing on both sides of the window.

     

   • For an inside mountain: The brackets should be placed upwards against the inside top corner of each side of the window.

     

3. 

   iii

   Drill the holes for the screws. Each bracket comes with 2 screws. If you are drilling into wood, utilize a 1/16-inch diameter drill chip to make a hole that is slightly smaller than the screw that yous will use to secure your bracket. Replace the bracket and drill your screws into place.^[7]

   • If you lot are drilling into drywall, plaster, concrete, tile, stone, or brick, apply appropriate screws, anchors, or plugs and follow the specific instructions that come with them.

   Ad

1. 

   1

   Snap the valance clips in place. Valance clips are used to attach the head rails to the valance. The valance is what covers the head rail and makes information technology look a flake more decorative. The valance clips should be snapped over the forepart lip of the head rail before the head runway is inserted into the bracket.^[8]

   • Your blinds may be made upwardly of 'ladders' of blinds. If this is the instance, snap each valance prune into identify side by side to the top of each ladder--non directly on tiptop of it. If they are put directly over each ladder, the valance clips might get caught in the cords of the blinds.

2. 

   2

   Place the head rail into the brackets. Once you have finished drilling the brackets into place, make certain the bracket doors are broad open and then insert the caput rail into the brackets. When you accept situated the head rail, snap the bracket doors closed. You lot should hear an audible snapping noise.

3. 

   3

   Attach the valance. Identify the valance along the head rail in the position you would like information technology to exist in. Rest information technology on top of the valance clips. When yous accept positioned it the way you would similar information technology be, press gently down so that the valance clips snap into the valance, holding it in place.^[ix]

4. 

   4

   Secure the blind wand. If your blinds came with a wand for opening and endmost them, and it did not come up pre-fastened, attach it now. Push the plastic sleeve of the hook up, insert the wand's end into the hook, and then slide the plastic covering back down.

   Advertisement

Add together New Question

• Question

  Should bedrooms take drapes or blinds?

  

  Karen Parziale is a Home Stager, Habitation Organizer, and the Founder of The Real Estate Staging Studio based in Hoboken, New Jersey. Karen has over xv years of home staging and decorating experience and has staged over 5,000 homes. She specializes in project management, infinite planning, material selections and architect/architect/client relationships

  

  Domicile Stager & Interior Designer

  Practiced Reply

  Take a look at the size of your windows outset. If your bedchamber has really big, sprawling windows, yous might be ameliorate off choosing going with drapes.

• Question

  Which type of blinds are best?

  

  Karen Parziale is a Dwelling house Stager, Home Organizer, and the Founder of The Existent Estate Staging Studio based in Hoboken, New Bailiwick of jersey. Karen has over 15 years of home staging and decorating experience and has staged over 5,000 homes. She specializes in projection management, space planning, material selections and builder/architect/client relationships

  

  Home Stager & Interior Designer

  Expert Respond

  Imitation blinds are great! They're almost ii in (5.08 cm) thick and are a lot more stylish-looking than aluminum blinds.

• Question

  Can I mitt screw in the brackets? I have no drill.

  

  Information technology depends on what the wall is fabricated of. If it is woods, it will be very difficult.

• Question

  How exercise I go about installing center support bracket?

  

  Heart support brackets can be a claiming to install. Withal, the method I found well-nigh success with is to employ a thin layer of gorilla glue to the backboard. Then yous adhere the center support subclass to the gum.

• Question

  How do I install regular, cheap pull-down blinds?

  

  Identify the terminate brackets onto the blinds. Concord the blinds upwards to the window elevation where you want them to hang; mark the window top at the edges of the brackets with a pencil. Remove the ii brackets from the blinds. Holding each bracket on the pencil lines, identify a dot within the bracket holes: this is where you lot will drill holes for the screws that hold the brackets. Drill (or nail) the holes where you marked. Attach each bracket with screws, and open up the brackets. Slide in the blind and shut each bracket. The pull-downwardly string should exist on the right, the slot turn rod on the left.

• Question

  How do I install superlative-mounted mini blinds?

  

  Is it going inside of a soffit? Anyway, usually at that place is a track, and it snaps into the brackets. Install the brackets and apply a central point for all brackets. (3brackets per 6'+ of rails) let's say your first bracket will exist 2 inches away from the window, install your next ii brackets ii inches away from the window. Hold the track with both hands put the back side in first and then clip the front. I detect securing the right side first and then the left side adjacent is the easiest manner. And so only clip in the vertical vanes and you lot are skilful to go.

Ask a Question

200 characters left

Include your email address to become a message when this question is answered.

Submit

Advertising

• Always read the instructions provided with your blinds.

• Become someone to assistance you hold the blinds up. If you have never operated a drill, go someone who knows how to apply information technology to assistance yous.

Advertising

Things You'll Need

• Blinds (with brackets, head rail, valance, valance clips)
• Tape Measure
• Level
• Pencil
• Drill
• Screws

About This Article

Article Summary X

To install blinds, start past making marks on the wall where you want to hang the blinds, either inside the window frame or on the wall above it, depending on your preference. Next, open the door on the each mounting subclass and line it upward with the mark you made. Then, adhere the brackets by drilling screws through the holes on the dorsum of the bracket. One time the brackets are fastened, snap the valance clips onto the head rail of the blinds earlier placing the rail into the brackets. Finally, close the subclass doors and attach the valance to the head rail. For tips on how to measure your windows before ordering blinds, read on!

Did this summary help you?

Thank you to all authors for creating a page that has been read 500,454 times.

Did this article help you lot?

Source: https://www.wikihow.com/Install-Blinds

Posted by: malonesulde1977.blogspot.com

Share this post